Constructing a Workbench From Pallet Wooden

Share it with your friends Like

Sustain with the progress of my pallet wooden machine stand.
To view Half 2, click on right here: http://youtu.be/QCLF7cvcbhw
To view Half three click on right here: http://youtu.be/4gcN0tscBgg
To view Half four click on right here: http://youtu.be/9kzw6rsMTDY
To view Half 5 click on right here: http://youtu.be/qJXFTT3d_m8
To view Half 6 click on right here: http://youtu.be/Sfdr6Hobw0Q
To view Half 7 click on right here: http://youtu.be/LKmnUDXs5Gc
To view Half eight click on right here: http://youtu.be/-vKIr9IX_Nw
To view Half 9 click on right here: http://youtu.be/DvAxHtrnATw
To view Half 10 click on right here: http://youtu.be/c_Rhf89z7Js

I proceed my Pallet Wooden creations by constructing a machine stand that may help my Spindle Sander and Floor Planer. It actually does seem like it is over kill on power, however you by no means know what future wants that will come up.

This actually would not work effectively for a workbench as a result of the desk high is just not excessive sufficient, however for my Spindle Sander, the working peak of its high is good for my peak.

Comments

Ron Briz says:

Pallet Wood Projects are always fun to make and being that some boards are warped a bit, that gives you a great excuse if some joints don't fit as well as they should.  Please subscribe to athiker7209 on YouTube.  Thanks!

Jeffrey Chaffins says:

Gonna be a nice stand

J.D. Ransom says:

Looking great Ron!  Thanks for sharing.

Write a comment

*

eighteen − 11 =